Herunterladen Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

TV
1
Performance TV Wall Bracket (21" to 37" TVs)
Instruction Manual
ENG
Read these instructions carefully before installing your equipment.
Install the wall bracket in a suitable location using fixings which are appropriate for the wall material and
structure. Consult a qualified builder if you are in any doubt as to the structural integrity of the wall.
Do not attempt to alter or modify any part of the wall mount or it's attachments.
Do not use if any parts are broken or appear to be damaged.
Tighten all bolts and fixings securely. Only use fixings provided with this bracket.
Do not mount your tv near to sources of heat or moisture.
Always have a minimum of two persons to install the wall bracket and tv.
TV Fixing Kit
A - M4 x 16mm
B - M5 x 16mm
C - M6 x 16mm
D - M4 Washer
E - M5 Nut
F - M5 x10
G - M5 x 10mm
(Pre-assembled)
Also required
x4
x6
1
Mount Bracket To Wall
x6
NOTE:
For ease of installation mount bracket on wall using position 1
and mark other positions using a spirit level. Then remove fixing
from position 1, remove bracket and drill other positions
x6
Use Fixings suitable for your type of wall construction.
Use All available fixing points
If in any doubt of the suitability of the wall, it's construction or
what type of fixings to use, consult a qualified builder or installe
x2
r.
1
loading

Inhaltszusammenfassung für Dynaudio TV1

  • Seite 3 Performance Wandhalterung für TV-Displays von 21“ – 37“ Bilddiagonale Montage-Anleitung Bitte lesen Sie diese Anleitung vor Montage der TV¹ sorgfältig. • Vergewissern Sie sich vor Installation der TV¹, ob die vorgesehene Wandfläche für die hängende • Befestigung der entsprechenden Last geeignet ist. Verwenden Sie nur Befestigungsmaterial, das auf die Eigenschaften der Wand abgestimmt ist.
  • Seite 4 HINWEIS: Befestigen der Montageplatte Liegen die Befestigungspunkte des TV-Gerätes mehr als 200 x 200 mm auseinander (bis max. 400 x 300 mm), verwenden Sie die beiliegenden vier Montage-Arme: Verbinden Sie die Arme mit der TV-Montageplatte mit Hilfe der Muttern ‚E' und der Schrauben ‚F', wie in Abb. (a) gezeigt. Verschrauben Sie dann die Montage-Arme mit dem TV-Gerät gemäß...