rundutec RNU-YT12A-BS Bedienungsanleitung Seite 13

EN
• Let the battery settle for 1 or 2 hours after charging and then
check the voltage. For the first use if the voltage is less than
12,8V an additional charge is necessary.
MAINTENANCE
• As this battery is fully sealed and activated at the factory, there
is no maintenance by way of topping up fluid levels. For this
reason, never attempt to open this battery.
• If this battery has not been used for a long time, check the
voltage and recharge if necessary.
• As some fitted equipment draws current even when the
vehicle is not used, the battery has to be checked regularly and
recharged if necessary.
• Winter: disconnect battery to avoid creeping current and
recharge regularly.
12