FLINQ Bali Handbuch Seite 3

Manuel
EN
Adapter Power input
Adapter Power output current
Charging port
Working temperature
Durability
Dimensions
Color
Handle + Ring + Feet
Net weight
LED function
BT version
BT frequency
BT range
IP Grade
Notes:
- Read and follow the instructions contained in this manual carefully. Keep these
instructions at a safe place for future reference.
- IP44: Protected against solid objects of 1mm or higher. Protected against
splashing water from all directions. Never immerse this light and it's remote
control under water like pools and ponds. The handle and aluminum ring are not
fully waterproof so we suggest to keep it dry when possible.
- The operating life of the product will be less if the ambient temperature is higher
than 45°C or lower than -10°C.
Note: The built-in rechargeable battery is not replaceable. Do not remove or
replace it, do not throw in the trash or in a fi re.
Warning: Keep the external adapter out of reach of children. Never charge this
product in moisture conditions or in the rain. Only charge it indoors, in a dry place.
100-240V 50/60Hz, 0.8A max
DC5V 1A (1000mA) max. with 1.8MT
cable (not waterproof)
DC Connection
0gr ~ + 45gr
> 25.000 hours
320 x 500 mm
White PE (Polyethylene)
PU Leather, Aluminum and ABS silver
look
3 kg
Charge status, battery full indication
V5 + EDR low use
2.4 ~ 2,485 Ghz
+- 10 meters in open space
IP44 (splashproof)
Charging
Note: During the fi rst use of the product, charge it always INDOORS ONLY at a
minimum time for 8-10 hours in the OFF mode.
Insert power cable
1
Insert the DC connector cable by lifting
up the rubber sealing cap and use the
adapter power connection to connect
and insert it to the mains power outlet.
Remove the charging cable
3
Remove the charging cable from the
device and disconnect the power adapter
from the main power outlet
FlinQ Speaker Lamp Bali
Light modes
2
Red led light is solid red: the device is
charging.
Blue light always on: the device is 90%
or fully charged.
OPEN
Secure rubber sealing cap
4
After charging is done make sure the
rubber sealing cap is set securely in place
before using the lamp outside.