pollin electronic 850867 Bedienungsanleitung

A Road Safety Guard
Instruction Manual
Thank you for purchasing the Portable DVR from our company. In order to help you operate it correctly,
please read this instruction manual carefully before using.
Product Picture and Functions
1. USB slot
2. TV OUT
3. SD/MMC Card slot
4. Speaker
5. Mount hole
6. Microphone
7. Battery cover
8. Lens
Attached Accessories
•  M anual
•  C ar Charger (including 12V/24V adaptor which transforms power to 5V)


Operation
Two power options:
A) Use built-in Li-ion battery.
The DVR can be activated after it has been placed on the vehicle by pressing the Power Switch (10) for
3 seconds, and turned off by pressing it again.
Charging: connect via USB cable or car charger. The indicator will turn red whilst charging, and then
switch off when fully charged.
B) Connect to Car Charger.
The DVR will record automatically when the car starts, and save the last file and turn off when the car
stops.
Recording
When turned on, the DVR will default to recording mode - the 'working' indicator blinks to show it is recor-
ding. The recorded file is saved to the SD/MMC Card. To stop recording, press the REC Button (11), or
recording will end when the car stops (the 'working' indicator will stop blinking).
871125246921_Manual.indd 1
9. IR LED
10. ON/OFF Power Switch and Charging indicator
light (Red)
11. REC/SNAP Working indicator light (Blue)
12. 2.4 inch LCD
13. Menu
14. Down
15. Up
16. Mode Button
•  M ount

•  U SB Cable

05-12-14 08:39