TQ STKT1042 Schnellstartanleitung

STKT1042 Quick-Start Guide
Connect Host PC and STKT1042
A
Use the supplied null modem cable to connect COM1 of the STKT1042 (X35)
to a serial port on your host PC (e.g. COM1 / ttyS0).
Run terminal emulator and configure serial port
Run your favourite terminal emulator on the host PC (we recommend
configure the serial port as follows :
Baudrate
115200
Supply the STKT1042 with power
B
Double-check the mains voltage required for the included power supply,
then connect it to connector X33 on the STKT1042.
Establish Serial Connection
U-Boot: The boot messages of U-Boot will show up in the terminal emulator.
Documentation:
Support Wiki / BSPs:
Data bits
8
B
http://www.tq-group.com/en/TQMT1042
http://support.tq-group.com/doku.php?id=en:power:tqmt104x
Parity Stop bits
none
Tera Term Pro
) and
Handshake
1 XON/XOFF
A