General Description - Eneo Rm-1000 Sicherheitshinweise

General Description

• Simple design supports Pelco Coaxitron
• Numerous control options: OSD Control (Menu: On or ENTER, UP, DOWN, LEFT, RIGHT)
• Enhanced battery life: Battery life threshold: 2.38V
Battery life (Power ON): approx. 5 hours (reference to ENERGIZER CR2025)
Sleep mode: After 45 seconds or when Coax is unplugged
• Temperature range (operation): -10° to +50° ambient
• Case dimension: 80 x 55 x 6mm (H/W/T)
Operation
Please insert a 3V battery (CR2025) before use.
OSD Control
Press ENTER button to turn on the OSD menu.
Use the arrow buttons to navigate through the menu.
Calibration Only needed when the lens motors are moved by an external force
Press EXIT, FAR and Auto FOCUS buttons in this order to calibrate the lens.
After calibration, the zoom motor will be moved to the Wide end.
Motorized focus When zooming in and out, focus motor will track the zoom motor.
and zoom
Please adjust the focus accordingly. Please note that the zoom motor will not track the focus motor.
eneo ® is a registered trademark of Videor E. Hartig GmbH
Exclusive distribution through specialised trade channels only.
Videor E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100
www.videor.com • www.eneo-security.com
Focus & Zoom motorized lens control (TELE, WIDE, NEAR, FAR), Auto Focus option
Press the PWR button to turn on the remote.
The LED should turn on. When the LED blinks, replace the battery.
Zoom In
Zoom Out
Focus Near
Focus
Auto Focus
OSD Up arrow
OSD Left arrow
OSD Down arrow
© Copyright by Videor E. Hartig GmbH
OSD Right arrow
Exit
Technical changes reserved.
07/2012