Horizont Hotline Explorer Lithium Kurzanleitung

Before use charge the torch for a minimum of 6 hours (maximum of 12 hours). Keep
the torch switched off during this period. While charging a red indicator on the
working light will be illuminated. This will turn green when fully charged.
The light will begin to dim when the battery is discharged. Place on charge imediatley
to ensure an efficient battery is maintaned. The battery is non replaceable.
Use supplied charger only.
Specification:
Main Beam - single 10w T6 LED
Work lamp - 15 5730 LED
Main beam - 400 lumens
Work lamp - 80 lumens
Battery - 3.7v/6000mA lithium battery
Working time - approx 15 hours
Charge time - approx 12 hours
Part: 47L200L Batch:
ONLY USE SUPPLIED CHARGER
DC 4.2v/500mA
F
III
hotline-fencing.co.uk
User guide - 47L200L - Explorer Lithium
Switch
Press once for low beam
Press twice for high beam
Press three times for flash mode
Press four times for working light
Press five times to turn off
LI-ION
Working light
Charge indicator
Charge port
www.hotline-fencing.co.uk