Installation And Setup Instructions - UNIelectronic UBA 1224 Bedienungsanleitung

English

Installation and setup instructions

To ensure reliable and save operation of the unit, you should carefully read this instruction- and
setup-manual.
To prevent overheating, make sure that the cabinet and / or the rack is sufficiently ventilated
and that there are no other heat sources in the immediate vicinity.
For trouble-free operation the ambient temperature of 30° C must not be exceeded.
Please do not expose unit to direct sunlight or place it near a heater. Avoid splashing water,
high humidity and extensive dust and vibration.
Should a foreign object or fluid get inside the unit, be sure to disconnect power immediately and
have unit checked by an authorized dealer.
Do not open unit, as otherwise warranty will be void.
Before switching the amplifier on, the master control as well as all input controls are completely
turned to it's utmost counterclockwise positions.
Incorrect positioning of these level controls can lead to sudden outburst of sound, that can
damage speakers and /or amplifier.
Features:
240 W/100 V resp. 4 x 120 W/100 V
•
Latest switching power supply technology
•
85% Efficiency
•
Very efficient low noise cooling
•
100 V operation w/o transformer
•
Line input w. screw terminal
•
RJ 45 remote control connector for power on/off
•
Status LEDs (Signal, Peak, Protection)
•
Multiple protection circuits
•
24 V DC-operation
•
484 x 395 x 44 mm (WxDxH)
•
19" Design
•