Algo ZR FT77 L Montageanleitung
Elektrische fensterheber
Quicklinks
Power Windows | Leve-glace
Electrique | Elektrische
Fensterheber | Elevalunas Electricos
Máquina De Vidro Elétrico |
Elektrische Raamheffers |
Alzacristalli Elettrici
rear doors (4d), portes arriere (4p), hintere türen (4t), puertas posteriores (4p), portas traseiras (4p), achterportieren (4p), porte posteriori (4p)
Pour / For
Fiat
Fiat MULTIPLA (186_)
(1999>2010)
LH 46510763
RH 46513600
14 w01
ZR FT77 L
BI 22216 L
LT FT77 L
30/848
left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro
THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.
DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.
ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.
ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.
DEZE AANWIJZINGEN GELDEN VOOR ZOWEL DE LINKER- ALS DE RECHTERKANT.
Η ΠΑΡΟΥΣΑ ΟΔΗΓΙΑ ΑΦΟΡΑ ΤΟΣΟ ΤΗΝ ΑΡΙΣΤΕΡΗ ΟΣΟ ΚΑΙ ΤΗ ΔΕΞΙΑ ΠΛΕΥΡΑ.
LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.
ZR FT77 R
BI 22216 R
LT FT77 R
30/847
Verwandte Anleitungen für Algo ZR FT77 L
Inhaltszusammenfassung für Algo ZR FT77 L
- Seite 1 ZR FT77 L ZR FT77 R Power Windows | Leve-glace Electrique | Elektrische BI 22216 L BI 22216 R Fensterheber | Elevalunas Electricos LT FT77 L LT FT77 R Máquina De Vidro Elétrico | Elektrische Raamheffers | 30/848 30/847 Alzacristalli Elettrici rear doors (4d), portes arriere (4p), hintere türen (4t), puertas posteriores (4p), portas traseiras (4p), achterportieren (4p), porte posteriori (4p)
- Seite 2 FT77 01/12/2022 ENGLISH ENGLISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) WARNING: DO NOT OPERATE THE WINDOW REGULATOR BEFORE IT IS COMPLETELY ASSEMBLY ON VEHICLE. Remove door trim and window regulator. B) Insert the electric window regulator into the door and secure it into the holes at positions 1, 2, 3, 4 and 5. C) Insert the pin 6 into the hole in the glass and fix with the appropriate clip.