Herunterladen Diese Seite drucken
loading

Inhaltszusammenfassung für WLMOUSE BEAST X Mini

  • Seite 2 Scan me!
  • Seite 3 ·length: 4.57in / 116mm ·width: 2.28in / 58mm ·height: 1.38in / 35mm ·weight: 34±2g ·MCU: Nordic 52840 58 mm ·Sensor: PAW3395 ·Polling Rate: 4K/8K ·Encoder: TTC Dust - Proof silver ·Switches: TTC Nihil Transparent Black Dot ·Side Buttons: Omron Blue Dots 35 mm...
  • Seite 4 WIRED USB 3.0 WIRELESS USB 3.0 To achieve the best performance for the mouse, please ensure that the distance between the receiver and the [EN] mouse does not exceed 50 cm, and that there are no wireless interference devices around the mouse. Addi- tionally, please connect to a USB 3.0 port or higher.
  • Seite 5 Dongle Pairing If the mouse cannot be used in wireless mode, please [EN] use the following method to pair the dongle. マウスがワイヤレスモードで使用できない場合は、以下の [JP] HOLD ON 3-4 Seconds 方法でレシーバーをペアリングしてください。 [KR] 마우스를 무선 모드에서 사용할 수 없는 경우, 다음 방법을 사용하여 수신기를 페어링하십시오. Si la souris ne peut pas être utilisée en mode sans fil, [FR] veuillez utiliser la méthode suivante pour appairer le...
  • Seite 6 [KR] 페어링 단계 1. 마우스를 컴퓨터에서 분리하십시오. 페어링 과정을 시작하려면 마우스를 무선 모드로 전환하십시오. 2. 왼쪽 및 오른쪽 마우스 버튼과 앞으로 가기 버튼을 3초 동안 누르고 있습니다. 3. 마우스의 녹색 LED가 평소보다 빠르게 깜박이기 시작하면, 포함된 케이블을 사용하여 4k 동글을 컴퓨터에...
  • Seite 7 DPI Setting The default DPI is set to 1600 DPI, and you can adjust the DPI levels in the driver settings. デフォルトのDPIは1600 DPIに設定されており、ドライバ設定 HOLD ON 3-4 Seconds でDPIレベルを調整できます。 기본 DPI는 1600 DPI로 설정되어 있으며, 드라이버 설정에서 DPI 레벨을 조정할 수 있습니다. Le DPI par défaut est réglé...
  • Seite 8: Wired Connection

    Polling Rate Setting Polling Rate Levels HOLD ON 3-4 Seconds wired connection 125 Hz 250 Hz 500 Hz 1000 Hz Wireless connection 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz [EN] [JP] [KR] [FR] [DE] [TR] Right Button...
  • Seite 9 LOD (Lift off Distance) Setting HOLD ON 3-4 Seconds LOD Levels 1 mm 2 mm [EN] [JP] [KR] [FR] [DE] [TR] Left Button 左ボタン 왼쪽 버튼 Bouton gauche Linke Taste Sol Tuş Scroll Wheel スクロールホイール 스크롤 휠 Molette Scrollrad Kaydırma Tekerleği Forward Button 前進ボタン...
  • Seite 10 Switching Between 1K and 8K Dongle HOLD ON 3-4 Seconds 1K Nano Dongle 8K Dongle [EN] [JP] [KR] [FR] [DE] [TR] Scroll Wheel スクロールホイール 스크롤 휠 Molette Scrollrad Kaydırma Tekerleği Forward Button 前進ボタン 오른쪽 버튼 Bouton avant Vorwärtstaste İleri Tuşu Back Button 戻るボタン...

Diese Anleitung auch für:

Beast x 8k