Moni RAFFY HA-013 Gebrauchsanweisung Seite 18

•
Always before use, check the functioning of the locking mechanisms.
•
Before placing the child in the seat, make sure that it is fully unfolded and
locked in the open position and that all locking mechanisms are tightly closed!
This will prevent the child from being injured by sudden folding of the chair.
IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative
only. Follow exactly the instructions and sequence for assembling and operating with
the product.
Check the securing of the fixation after each operation. Fixing a certain position in most
cases is accompanied by a clicking sound.
Components – Figure PD: 1. Upholstered seat together with a 5-point seat belt; 2.
Double tray; 3. Front and rear support tube (leg); 4. Castor – 4 pcs; 5. Upper support
frame set – 2 pieces.
Product assembly – Figure A: WARNING! Make sure that the base is assembled
correctly and is stable, this ensures the safety of your child!
Strictly follow the instructions and sequence for assembling the product as shown in
the diagrams.
Assemble the seat by inserting the upper support frames, left and right, into the seat
coupling holes in the direction of the arrows (see Figure 1). You have to hear a clicking
sound. Install the front and rear support tubes to the assembled seat frames as shown
in Figure 2. Press and hold the button under the armrests of the high chair to open the
frame all the way down or to adjust it to the chosen height (see Figure 3). Place the
castors at the bottom of the legs as shown in Figure 4. To lock the castors, use the
locking mechanism placed on the castors themselves. Carefully place and secure the
feeding tray to the structure, then make sure it is securely held. The chair is ready for
use (figure 5).
Seat height and backrest inclination – Figure B
- Seat height adjustment – 3 levels: By pressing the side button of the frame you can
move the seat down or up. The seat has 3 levels of height adjustment.
- Backrest inclination adjustment: Hold the button on the back of the chair and pull
the seat back to the desired position.
Attention! Do not change the height and inclination of the seat when a child is seated
in the high chair.
Footrest – Figure C: To adjust the footrest, press both side buttons shown in Figure C
at the same time.
Folding the high chair – Figure E: Put the seat in the lowest position. Press the
button under the armrests of the high chair and slide the rear legs forward, fold the
high chair.
ASSEMBLY INSTRUCTIONS
18