Installation
Electric shock
▪
Disconnect the mains voltage or mains plug before starting work.
▪
Make sure that no hazards can be caused by electrically conductive objects or media.
▪
Make sure that the type of electrical installation does not reduce the protection against electric shock
(protection class, protective insulation).
▪
Make sure that the cable is not bent excessively or crushed.
Non-compliance with these instructions will result in serious or fatal injury.
Operation
Remote control unit
1406822_Manual_16873_04_V1.docx
DANGER
The remote control works with two AAA batteries, which are
included in the package.
The remote control saves your last setting (memory function).
When turned on again, the last setting is used.
The remote control buttons are divided into eight sections.
1. Night light button: switches dimmed to warm white
2. ON/OFF button: Fan
3. K-button: Continuously reduce light color
4. Up/down button: adjustable direction of rotation of the fan
5. ON/OFF button: light
6. Brightness button: infinitely increase
7. K-button: Continuously increase light color
8. Button without function
9. Brightness Button: infinitely diminish
10. 1 / 2 / 3 fan speed button:
Eco, Normal and Turbo
11. Timer button: 1 hour or 2 hours running time
12. K button: Switching from warm white, neutral white, cool white
8 / 37