Moza R12 Wheel Base Benutzerhandbuch Seite 4

Installation Guide
Attach the base to the mounting bracket through the four screw holes at the bottom.
Connect the power connector and type-B USB connector into the corresponding ports on the
rear of the R12 base, plug the PSU into a power socket and connect the type-A USB
connector to the PC. Short press the power button on the rear of the R12 base (short press
to power on, long press to power off).
Navigate to MOZA Racing (www.mozaracing.com) and download the latest version of the
MOZA Pit House software. Install it and start your racing journey!
Desk Clamp Installation Guide
Align the four holes on the base and clamp and use the four supplied screws to attach them
both securely. Place the clamp and base into position on the desk and fully tighten the knobs
until the base is secure enough to prevent movement during use.
Precautions
To ensure safe and proper use of this device, please follow these guidelines:

Do not expose the device to liquids or humidity as it may cause fire or electric shock.

Avoid using the device in direct sunlight.

Recommended indoor temperature: 15°C ~ 35°C.

For your safety and well-being, please monitor your gaming time and take breaks as
needed.

The device is not suitable for children under the age of 6, small accessories may pose
a choking hazard! Children under 13 years of age should have adult supervision.

It is strictly forbidden to disassemble the equipment by yourself, failure to adhere to
this will result in loss of warranty.
4