Ex-Akustischer Telefon-Anrufzweitmelder
Ex-Audible Telephone Call Secondary Sounder
Typ AS1 / Type AS1
Abmessunge n
Physical dimensions
Abmessungen [mm]
Dimensions [mm]
150
M20x1,5
130
117
AS1 5.0
Hinweis
Vor Installation des Gerätes ist
diese Gebrauchsanweisung sorg-
fältig zu lesen. Bei eventuellen
Schäden und Ansprüchen gelten
die „Allgemeinen Liefer-
bedingungen für Erzeugnisse und
Leistungen der Elektronikindustrie"
in ihrer jeweils letzten Fassung.
Verwendungshinweise
Der explosionsgeschützte, Zweit-
wecker ist für den Einsatz in ex-
plosionsgefährdeten Industrie-
bereichen, deren Gebäuden und
im Freien, z.B. in der petroche-
mischen Industrie konzipiert. Die
hohe Qualität der von uns hier
eingesetzten und in unserem
Labor geprüften Materialien
gestatten die Verwendung dieses
exlektrischen Betriebsmittels auch
in extrem explosionsgefährdeten
Bereichen der Industrie.
Andere Einsatzgebiete sind mit
dem Hersteller abzustimmen.
Montage
Das Gerät ist für die Wand- und
Deckenmontage (Beachte: Tech-
5,5
nische Daten) geeignet. Die An-
baumaße sind dem Maßbild zu
entnehmen.
Befestigungselemente und Unter-
grund müssen das Gewicht des
Gerätes (~ 0,9kg) tragen können.
Anschließen und Einstellen
Anschließen: Das Anschließen und
Einstellen des Gerätes darf nur
durch unterwiesenes Fachpersonal
erfolgen. Das Gerät ist für den
Betrieb mit Rufwechselspannung
32 V
...75 V
konstruiert.
AC
AC
Nachfolgende Anschluss- und Ein-
stellvorschriften sind einzuhalten.
Es sind die Vorschriften und Hin-
weise zum Anschalten an das
Telefonnetz zu beachten. Ruf-
wechselspannung an Klemmen
Lb und W.
Note
Prior to installing the device, these
operating instructions must be
read carefully. In case of any
damage and liabilities the latest
version of the „General terms of
delivery of products and services
in the electric industry" is
authoritative.
Notes on use
The explosion proof secondary
sounder is conceived for use in ind-
dustrial hazardous areas, in
industry buildings or outdoors, for
instance in the petrochemical
industry. The high quality of the
materials tested in our laboratories
and used in this device enables it to
be used under extreme conditions in
the hazardous areas of industry.
Other areas of use should be
discussed with the manufacturer.
Mounting
The device is suited for wall and
ceiling mounting (observe the
Technical
the dimensional drawing for the
mounting dimensions.
Both the fasteners and the moun-
ting surface must be able to carry
the weight of the device (~ 0.9 kg).
Connecting and Setting
Connecting: Only especially edu-
cated personnel may connect and
adjust the device. The device is
designed for operation with Rin-
ging alternating current 32 V
75 V
.
AC
The following connection and
adjustment regulations must be
obeyed.
The rules and regulations of
each country regarding connections
to the public telephone network
must be observed. Ringing alternating
current to terminals Lb and W.
Refer to
...
AC
1