Ronix 2115 Bedienungsanleitung Seite 18

use. Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with
the instruction, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
- Have your power tool serviced by qualified repair person using only
identical replacement parts. This will ensure that the safety of power tool
is maintained.
- Follow instruction for lubricating and changing accessories.
- Keep handles dry, clean and free from oil and grease.
ELECTRIC DRILL SAFETY WARNINGS
- Wear ear protectors when impact drilling. Exposure to noise can cause
hearing loss.
- Hold power tool by insulated gripping surface, when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator and
electric shock.
- Always be sure you have a firm footing. Be sure no one is below when
using the tool in high locations.
- Hold the tool firmly with both hands.
- Keep hands away from rotating parts.
- Don't leave the tool running. Operate the tool only when hand-held.
- Don't touch the bit or the work piece immediately after operation; they
may be extremely hot and cold burn your skin.
- Some material contains chemical which may be toxic. Take caution to
prevent dust inhalation and skin contact. Follow material supplier safety data.
|
16
Electric Drill 10mm