Led Indications - KW Hydraulik BPL036 Bedienungsanleitung

English
Starting ON the tool
GREEN GREEN
Stopping OFF of the tool
RED RED
Battery charge level
- -
- -
- -
Battery protection CUT-OFF
- -
Good crimping
GREEN
Bad crimping
-
RED
Temperature protection
YELLOW YELLOW
ORANGE ORANGE
Tool security
-
RED
Maintenance indication
ORANGE
Maintenance indication
ORANGE
Return for maintenance
-
RED
Tool connected to USB
-
BLUE
0412 - BPL036 - 14 KW Hydraulik GmbH – 96515 Sonneberg – Germany – www.kw-hydraulik.de
Press the button ON/OFF tool.
The 3 LED lighting GREEN for 1 second.
The front DEL lighting.
GREEN
The tool is ready for work.
Press the button ON/OFF tool.
The 3 LED lighting RED for 1 second. The tool switches OFF.
-
The tool switches OFF automatically without use during 10min.
RED
After powering ON the tool, if the LED battery is lighting GREEN, the battery is full
charged.
-
GREEN
After powering ON the tool, if the LED battery is lighting ORANGE, the battery is half
-
charged.
ORANGE
After powering ON the tool, if the LED battery is lighting RED, the battery is discharged.
-
The battery must be recharged. Replace the battery by a full charged battery.
RED
If the battery is not powerful enough for one cycle, the tool is automatically locked. The
LED battery flashing RED.
The front DEL flashing.
RED
The battery must be recharged. Replace the battery by a full charged battery.
At the end of the cycle, the LED flashing GREEN during 5 seconds: good crimping.
The tool does not restart during flashing.
- -
At the end of the cycle, the LED flashing RED during 5 seconds: bad crimping.
The front DEL flashing.
The user released the trigger before the end of the crimping or good crimping parame-
-
ters not reached.
The tool is locked. Press the button ON/OFF tool for another crimping.
-
The front DEL flashing.
For user security, the tool is blocked automatically in case of problem. The LED mainte-
nance flashing RED during 10 seconds.
Press the button ON/OFF tool.
- -
If the indication reappears, return the tool to the DUBUIS after-sales Service.
The LED maintenance lighting ORANGE all the time after ON to indicate the future
maintenance.
The user has 1000 cycles before the final block of the tool.
- -
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing ORANGE all the time after ON. The tool is automatically
locked after each crimping.
Press the button ON/OFF tool.
- -
The user has 500 cycles before the final block of the tool.
Return the tool to the DUBUIS after-sales Service.
The LED maintenance flashing RED. The tool is definitively locked.
The front DEL flashing.
-
Return the tool to the DUBUIS after-sales Service.
When the tool is connected to the USB port, the LED maintenance lighting BLUE during
the connection.
- -

LED INDICATIONS

LED INDICATIONS LED INDICATIONS LED INDICATIONS
If the temperature is out of range of use, the cycle and maintenance LED flashing
YELLOW and ORANGE. The tool can't be used.
LED lighting for 1 second.
LED flashing.
LED lighting.