Beep Tone On/Off; End Of Communication Signal (Roger) On/Off; Other Features; Automatic Squelch - brennenstuhl Walkie Talkie PMR TRX 3000 Bedienungsanleitung

Three times
Four times
5.

Other features

Beep tone ON/OFF

This feature allows the radio to sound a confirmation beep
tone whenever a button is pressed.
To switch the bleep tone on or off, proceed as follows:
Press the MENU button three times until the »to
flashes in the LC display.
Press the UP or DN button to enable (»ON« appears in the
display) or disable (»OF« appears in the display) the bleep
tone feature.
To exit the selection mode, press the TALK button once.

End of communication signal (roger) ON/OFF

The roger signal will be automatically transmitted as soon as
the TALK button is released. This lets the other person know
that you have finished transmitting your message.
To enable or disable the roger signal:
Press the MENU button four times until the »ro
appears flashing in the LC display.
Press the UP or DN button to enable (»ON« appears in the
LC display) or disable (»OF« appears in the display) the
roger signal.
To exit the roger signal feature, press the TALK button.

Automatic squelch

Your PMR is fitted with automatic squelch circuitry which filters
out weak transmissions and unwanted extraneous noise.
These signals may be picked up as background static and are
usually caused by the nature of the terrain or the fact that your
radio is at the limit of its range.
Monitor
With this function, you can switch off the automatic squelch
feature, temporarily or permanently. In this way, the maximum
possible range of your radio can be used, but it may pick up
static signals as well. You can adjust the speaker volume by
the noise of the static.
Press MENU and UP button simultaneously. The monitor
signals will appear in the LC display.
Press MENU the button to restore the automatic squelch
function.
22
on
« symbol
on
« symbol