Automatic Program - VEGA SPOT 60 Bedienungsanleitung

Functions
While in any Submenu, press the Menu button to go back to
the Main Menu.
Menu Overview: look at page 12
DMX Address Settings
This function allows the DMX address to be adjusted via the LED display.
Press the Menu button, until A001 is displayed.
By pressing the Enter button, A0.0.1 will appear! The desired DMX address may
now be selected.
Press the Enter button to confirm the selection.
DMX Channel Mode
This function allows the Channel Mode of the moving head to be adjusted.
Press the Menu button, until ChMd is displayed.
Press the Enter button to reach the submenu and select the Channel Mode.
Press the Enter button to confirm the selection.
Speed Mode
This function adjusts the speed settings of this device.
Press the Menu button, until SPMd is displayed.
Press the Enter button to reach the submenu to select between High Speed and
Low Speed.
Press the Enter button to confirm the selection.
Master-Slave
Press the Menu button, until SLMd is displayed.
Press the Enter button to reach the submenu to select whether the device should
operate as Master or Slave.
Press the Enter button to confirm the selection.

Automatic Program

Press the Menu button, until SHMd is displayed.
Press the Enter button to reach the submenu to select between the various Au-
tomatic Modes.
Press the Enter button to confirm the selection.
Sound 2 Light
Press the Menu button, until Soun is displayed.
Press the Enter button to reach the submenu to active or deactivate the Sound
2 Light Mode.
Press the Enter button to confirm the selection.
PAN Reverse On/ Off
Press the Menu button, until PAN is displayed.
Press the Enter button to reach the submenu to invert PAN (x-axis).
Press the Enter button to confirm the selection.
8