AlzaPower APW-FMTV5 Bedienungsanleitung Seite 7

USE
Modulator connection / disconnection
Plug the modulator into the vehicle's auxiliary power (cigarette lighter) outlet. The display
will first briefly show the car battery voltage, then show "bt" to indicate that the modulator is
pairing with the connected device.
When not using the modulator, remove it from the power outlet.
Manual power off / on
To manually turn the modulator on or off, press and hold CH for 2 seconds. After switching off,
only the charging function will remain active.
Turn off backlight
Press and hold Bass Booster for 3 seconds to turn off the blue backlight.
To turn it back on, press and hold Bass Booster for 3 seconds again.
Pairing using Bluetooth
1. Connect the modulator to the power connector (12 V – 24 V) in your car.
2. While "bt" is flashing on the display, turn on your phone's Bluetooth and start searching
for available devices.
3. Select "APW-FMTV5" from the list and the pairing process starts. If you are prompted for
a password, enter the default password "0000" or "1234".
4. Once the display stops flashing "bt" and shows the FM frequency, the pairing process
has completed successfully.
Note: To ensure a stable connection, keep a maximum distance of 5 m between the tele-
phone and the modulator.
Automatic pairing
The next time you turn on the modulator, it automatically pairs with the last paired phone.
We therefore recommend that you switch on the Bluetooth function before switching on
the modulator.
ENGLISH 7