Johnson Controls M9208-GGx-1 Bedienungsanleitung

M9208-GGx-1
Proportional Electric Spring Return Actuators
Installation Guide
M9208-GGx-1
Side A:
CCW Spring Return Direction
40
30
50
60
70
85
90
CAL
-5
2-10 2-10
0-10 0-10
10
A
Figure 2: Side A and Side B of Actuator
European Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
99
64.5
3.2
120.7
4 x
Ø 5.45
Side B:
CW Spring Return Direction
(a). Auxiliary switch
adjuster
(b). Shaft adapter
CAL
2-10 2-10
0-10 0-10
(c). Mode selector
(d). Manual override
10
(e). Manual override
lock shaft
NA/SA Single Point of Contact:
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
© Copyright 2017 Johnson Controls. All rights reserved. Any unauthorized use or copying is strictly prohibited.
19
28.5
124.8
160.7
8.5
6.5
Figure 1: Dimensions in mm
Figure 3: Fitting the Anti-rotation Bracket on the Damper Frame or Duct
30 40
20 50
60
70
85
90
-5
B
APAC Single Point of Contact:
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142 - CHINA
Johnson Controls
P/N 14-88360-2447 Rev. C
57.5
6.4
34.5
(a). M3 x 10 mm - Self-Drilling
Sheet Metal Screws
(Two Locations)
(b). Anti-rotation Bracket
(c). Damper Frame
Figure 4: Changing the position of the Coupler
®
is registered trademark of Johnson Controls.
All marks herein are the marks of their respective owners.
www.johnsoncontrols.com
Issue Date 10 2017
16.7
40.7