Cotech TUBE WF66T10L06D8 54040-UK Bedienungsanleitung

LED Worktop Light
Art.no 18-2883 Model TUBE WF66T10L06D8 54040-UK
36-5643 TUBE WF66T10L06D8 54040
Please read the entire instruction manual before using
the product and then save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. In the event of technical
problems or other queries, please contact our Customer
Services.
Safety
• Do not use the light if it or its mains lead and plug are
damaged in any way.
• The light should only be connected to a wall outlet with
a 230 V, 50 Hz power supply.
• The light is intended for indoor use only.
• Do not mount the light in an environment where it is
exposed to water, moisture or extreme temperatures.
Assembly
Note: Mount the light so that there is at least 2.5 cm of free
space available around all sides.
1. Screw the light's mounting brackets in the desired location.
Make sure that the light's mains socket is facing the proper
direction for connecting its mains lead to a nearby power
source. The mains lead only fits the light in one direction.
2. Connect the mains lead to the light and an available
wall socket. Make sure that the mains lead is securely
connected to the light's power socket.
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Adding additional lights
Adding additional lights is easy. The max number of light
fixtures that can be connected is 12. Mount the additional
light's mounting brackets in the same manner as described in
step 1 above. There are 2 methods in which additional lights
can be connected:
Direct connection
1. Push the supplied 2. Remove the socket cover
connector into the original from the second light.
light's mains socket.
3. Connect both lights together. Make sure that the connector
is securely inserted and that both lights are securely
connected to each other.
Series cable connection
Use the supplied series
connection cable to connect
the first light to the second.
Care and maintenance
• Use a dry cloth to wipe the light fixture/s clean when
needed.
• Pull the light's plug from the wall socket if the product is
not be used for an extended period.
Troubleshooting guide
The light • Check that the light is turned on.
doesn't work.
• Make sure that the mains lead
is undamaged and is securely
connected to both the wall socket
and the light.
• Check that the wall socket is live.
• Make sure that the connected lights
are whole, undamaged and securely
connected to each other.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that
the material can be disposed of in a responsible
manner. When recycling your product, take it to
your local collection facility or contact the place
of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Rated voltage 230 V, 50 Hz
Mains lead 1.4 m
Series connection cable 27 cm
Power 10 W
Luminous flux 800 lm
Colour temperature 3000 K
Protection class IP20
Size 584 × 25 × 35 mm
Non-dimmable