Sygonix SY-4890998 Bedienungsanleitung Seite 4

Operation
Read and follow the chapter "Safety information" carefully.
• For operation, unwind the mains cable of the power strip completely and without loops.
• Mount the product in a suitable location. Lay the cable such that nobody will trip over it. Use
suitable padding to protect valuable surfaces against scratches.
• Insert the plug into a properly earthed mains socket (wall socket).
• Connect up to three consumers to the sockets on the power strip.
• If the power strip has an on/off switch (see 'Technical data'), you can use it to switch all
consumers on or off. The indicator light in the on/off switch illuminates when switched on.
Socket Strip Item No. 2522223, 1732743
This power strip has surge protection. The surge protection is ready when the red warning
light shines.
If the red warning light does not shine, the surge protection has tripped. In this case, the socket
strip may still be used, but surge protection is no longer provided.
The green control light indicates that the protective conductor is available (control light is
activated).
If the socket strip is connected to the mains voltage (and the mains voltage is availa-
ble), but the green control light does not shine, something is wrong with the voltage/
power supply. Unplug the mains plug of the socket strip from the mains socket. Do
not connect any device to the mains socket, but have it checked by an expert.
Care and cleaning
• This product does not require maintenance. This product does not contain any components
that require maintenance. Never attempt to open or disassemble it. Repair or maintenance
work must be carried out by a technician or a specialist repair centre.
• Disconnect the product from the power supply before cleaning.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these may damage the housing or prevent the product from functioning properly.
• Use a dry, lint-free cloth to clean the product.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
Specifications
See table to the right.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in elec-
tronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2446231_v4_0223_02_dh_mh_4L