SECURX TR06 Bedienungsanleitung

it is obligatory to verify the free space required beneath the user at the workplace before each occasion of use
!
the fall arrest system, so that, in the case of a fall, there will be no collision with the ground or other obstacle in
the fall path. The required value of the free space should be taken from instruction manual of used equipment.
! there are many hazards that may affect the performance of the equipment and corresponding safety precautions
that have to be observed during equipment utilization, especially:- trailing or looping of lanyards or lifelines over
sharp edges,- any defects like cutting, abrasion, corrosion,
! - climatic exposure,- pendulum falls,- extremes of temperature,- chemical reagents,- electrical conductivity.
! personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or
foil bag or cases made of steel or plastic) to protect it against damage or moisture.
! the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the
equipment. For textile products use mild detergents for delicate fabrics, wash by hand or in a machine and rinse
in water. Plastic parts can be cleaned only with water. When the equipment becomes wet, either from being in
use or when due cleaning, it shall be allowed to dry naturally, and shall be kept away from direct heat. In metallic
products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better
operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of
the equipment.
! personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct
light, ultraviolet degradation, damp environment, sharp edges, extreme temperatures and corrosive or
aggressive substances.
IDENTITY CARD
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED. THE
IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION
FOR PROTECTIVE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF
EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON. THE IDENTITY CARD
SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY
CARD. ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
MODEL AND TYPE OF EQUIPMENT
SERIAL NUMBER
USER NAME
DATE OF PURCHASE
PERIODIC EXAMINATION AND REPAIR HISTORY
REASON FOR ENTRY PERIODIC DEFECTS NOTED, REPAIRS CARRIED OUT
DATE
INSPECTION OR REPAIR AND OTHER REVELANT INFORMATIONS
Notified body for EU type examination according to PPE Regulation 2016/425:
Manufacturer:
APAVE SUD EUROPE SAS (no 0082)– CS 60193 – F13322 MARSEILLE CEDEX 16 - France
PROF-PRAXIS NV/SA
Notified body for control production:
Scheibeekstraat 25-29
APAVE SUD EUROPE SAS (no 0082)– CS 60193 – F13322 MARSEILLE CEDEX 16 - France
1540 Herne, Belgium
sales@prof-praxis.com
EU declaration of conformity: www.prof-praxis.com
REF. NUMBER
DATE OF MANUF.
DATE OF PUTTING
INTO OPERATION
NAME AND SIGNATURE PERIODIC EXAMINATION
OF COMPETENT PERSON NEXT DUE DATE
Instruction Manual RETRACTABLE TYPE
Read carefully FALL ARRESTER
the manual
SECUR-STOP : TR06
before use
the equipment
Reference number:
ESSENTIAL FEATURES
The retractable-type fall arrester device a component of the personal protective equipment against falls
from a height and conforms to EN 360:2002. The fall arrester is the protection for one person only. The
working length is 6m.
MARKING OF THE FALL ARRESTER
Inspect
the device
before each
use
maximal admissible
deflection of the cable
from the vertical line
Number of European Standard
SECUR-STOP : TR06
Device manufacturer
or distributor
Reference number
of the device
SX 102 442
Reference No.:
mm.yyyy
Month and year Date of manufacture:
of manufacture
SX 102 442
Swivel handle for
anchoring to a structure
Identity label
Webbing retractor with brake
and energy dissipating mechanism
inside plastic casing
Working webbing
made of 17mm
polyester/kevlar webbing
Snap hook with swivel function
and fall indicator
range
of operating
temperatures
XXX kg
check locking
before each
use
CE mark and number of notified body
inspecting the equipment
Retractable type fall arrester / Dispositivo Retractil
Antichute a rappel autom. / Höhensicherungsgerät
Pára-quedas de encravamento automático
Dispositivo anticaduta di tipo retrattile
Serial number / Lote / Numero
XXXXXX
Serien nr. / Remessa / Lotto
use only a full body
harness conformed
to EN 361
don't realese rapidly
unwinded cable
don't repair
the device
yourself
don't use the device
with damaged
cable
before use
read the manual
admissible weight
of the user
store the device in
a protected place
type of the equipment
serial number
of the device
EN