Supvan G15M Mini Bedienungsanleitung Seite 6

Safety Information
Do not pull the label forcibly during the printing process, to
avoid damage to the printer;
This product is a precision product, please use on a plain
surface, avoid fall and other impacts.
The print head of this product is a precision part. Do not
scratch it to avoid affecting the printing function;
Do not throw the printer into fire or high temperature;
Please use a single power socket, instead of multiple sockets
with multiple devices plugged in, which may cause fire or
electric shock;
8
Please carefully read this manual
before use the product.
Please keep this product and its
accessories away from children,
to avoid potential danger.
Do not disassemble the printer if
you are not an authorized service
person; Do not open the cover
when the printer is printing;
Please use SUPVAN's factory
original products and consum-
ables, otherwise may result in
bad printing quality or damage to
the printer.
Please do not use an adapter that does not support DC 5V
output;
When charging, do not let printer / power supply / power
socket to be in contact with water, and do not plug or unplug
the power with wet hands, to prevent electric shock;
Please do not let metal or liquid enter the equipment, to
prevent fire or electric shock, or damage to the internal parts
and the printer;
Please use the printer in a clean environment. Do not use it on
rug or blanket, or dusts may cause short circuit.
Please keep the printer away from flammable solutions such
as alcohol or gasoline, and away from fire to avoid explosion
and fire hazards.
Please do not touch the print head with your hand. If you
touch it at the end of the printer, it may cause skin burns;
Please do not press the printer;
The printer and label paper supplies should be stored in a
room temperature, dry, ventilated place without direct
sunlight.
If peculiar smell or sound is detected when using the printer,
please turn it off immediately and contact the seller.
After long period of working, the lithium battery may generate
heat and diffuse on the bottom side of the printer. This is
normal. You may pause the printer and wait it to cool to
resume normal work.
9