Renkforce 1425528 Bedienungsanleitung Seite 4

Operating instructions
Flushed-mounted motion detector 160°
Item no. 1425528
Intended use
The flushed-mounted motion detector's integrated PIR sensor responds to temperature chan-
ges within the detection range, e.g. when a person enters the detection range.
The flushed-mounted motion detector is thus designed for monitoring entrances, staircases,
or similar. Due to its design, it can also be used for instance as replacement for a light switch.
The outlet of the flush-mounted motion detector can be connected with for e.g. a light (see
chapter „Technical Data" for the power input; additionally please observe the corresponding
reduced power).
The flush-mounted motion detector may only be used on the mains voltage (220 - 240 V/AC,
50 Hz).
Always observe the safety instructions and all other information included in these operating
instructions. Read the operating instructions carefully; keep them in a safe place and/or pass
them on to other users of the wall extension reel.
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or
converted!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Flushed-mounted motion detector
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols, Labels
The lightning symbol inside a triangle is used when there is a potential risk of perso-
nal injury, such as electric shock.
T his symbol indicates specific risks associated with handling, operation or use.
The arrow symbol indicates special tips and operating information.
The product may be used only in dry, indoor rooms; it must not get damp or wet.
Observe the operating instructions!
Safety Instructions
Read the complete operating instructions carefully before using the product;
they contain important information on proper installation and operation.
Damages due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
Attention, important note!
This device should be installed only by people with relevant electro-technical
knowledge and experience! *)
If it is not installed properly, you risk:
• your own life
• the life of the user of the electrical system.
If it is installed improperly, you risk severe damage to property, e.g., by fire.
You face the risk of personal liability for personal injury and material damage.
Contact an electrician!
*) Specialist knowledge required for the installation:
For the installation, in particular, the following specialist knowledge is required:
• the „5 safety rules" to be followed: Switch off power; secure against switching
back on; determine voltage-free status; earthing and short-circuiting; cover or
fence off nearby live parts
• Choose appropriate tools, meters and, if necessary, personal protective equip-
ment
• Evaluation of the measurement results
• Selection of the electrical installation material to ensure the shutdown conditions
• IP protection types
• Installation of the electrical installation material
• Type of mains supply network (TN system, IT system, TT system) and the con-
nection conditions that follow from them (classical earthing, protective earthing,
required additional measures, etc.)
If you do not have the expertise required for the installation, do not connect
and install it yourself but ask a qualified technician.
• U nauthorised conversion and/or modification of the product is not allowed for sa-
fety and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children! There is
danger of a life-threatening electric shock!
• The product may only be operated on the mains voltage (see section „Technical
Information"). Never try to operate the product at another voltage, as this will
result in the destruction of the product.
• During installation, all poles must be disconnected from the mains voltage (e.g.
via RCD).
• The product may be installed and used only in dry indoor spaces; it must not get
damp or wet. There is danger of a life-threatening electric shock!
• O nly install and use the product when it is firmly mounted. Use the product e.g. - in
a suitable flush-mounting or surface mounting or other suitable casing, so that the
required protection against contact is ensured.
• Never install or use the product in a vehicle.
• Do not use this product in rooms that are under adverse environmental conditions
where combustible gases, vapours or dust are or may be present! There is a
danger of explosion!
• The product must not be exposed to extreme temperatures, direct sunlight, strong
vibrations, dust, dirt or heavy mechanical stress. Keep the product away from
strong magnetic fields generated by machines, electric motors or loudspeakers.
• N ever overload the product. Observe the maximum connected load specified in
the chapter "Technical Data".
• If it can be assumed that safe operation is no longer possible, the product must
be turned off and precautions must be taken to ensure that it is not used uninten-
tionally. After this, arrange for an expert to check the product.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- t he product does not work at all or works poorly (where there is flickering light,
leaking smoke or a smell of burning, audible crackling noises, or discolouration
of the product or to adjacent surfaces)
- the product was stored for a longer period of time in unfavourable conditions
- It was exposed to heavy loads during transport
• Do not leave packaging material carelessly lying around, since it could become a
dangerous plaything for children.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed!
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.