OPER ATION MANUAL
E XCELLENCE POWER BAR
FURTHER PRODUCT DATA
•
Rated voltage:
•
Rated current:
•
Output:
EXAMPLE CONNECTION
Amp
ADDITIONAL INFORMATION
When using multiple power boards and extension cables, pay special attention to the DIN VDE 0100 part 420,
para. 4.1 (risk of fire in electrical installations). Furthermore, the VDE 0100-410:2007-06 also requires short
breaks of 0.4 s for the TN system. The temperature of the cable may rise in such cases to the point of causing
a fire. Therefore, the following applies to ALL power boards:
•
Do not connect them in a row
•
Do not use if covered
For power strips with two-pin switches, the units connected to the switched sockets will be reliably and 2-pin
(also known as all-pin) disconnected from the mains. However, the absence of voltage in the strip is only en-
sured when the mains plug is disconnected.
8
230VAC
16A
3680W max.
Phono Pre Amp
Pre Amp
CD Player
DAC
Record Player