Teleco TMATE AL Serie Bedienungsanleitung

T-MATE: 5/12-24VDC BLUETOOTH INTERFACE, PROGRAMMABLE BY MEANS OF AN APP, TO CONTROL ANY T-MATE: 5/12-24VDC BLUETOOTH INTERFACE, PROGRAMMABLE BY MEANS OF AN APP, TO CONTROL ANY
TELECO PRODUCT. TELECO PRODUCT.
Product code Product code
TMATExxxAL TMATExxxAL
TMATExxxBL TMATExxxBL
Characteristics Characteristics
• • Available in both 868.3MHz and 916MHz frequencies. Available in both 868.3MHz and 916MHz frequencies.
• • Easy access via Bluetooth from any compatible device. Easy access via Bluetooth from any compatible device.
• • Up to 50 programmable device commands. Up to 50 programmable device commands.
• • Possibility to create scenarios. Possibility to create scenarios.
• • Weekly timer to send commands at a specific date and time. Weekly timer to send commands at a specific date and time.
• • Wired input for the connection of push-button or PIR to recall Wired input for the connection of push-button or PIR to recall
a favourite scenario. a favourite scenario.
T-MATE App
DIMENSIONS AND CONNECTIONS DIMENSIONS AND CONNECTIONS
115 mm
65 mm
25 mm
15 mm
T-MATEXXXAL-BL
This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights
TELECO AUTOMATION SRL
Via dell'Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com
(power supply included) (power supply included)
Bluetooth
- 5 or 12-24Vdc - 5 or 12-24Vdc
- -
PIR or push-button PIR or push-button
input input
Thermoplastic ABS Thermoplastic ABS
Not suitable for direct UV exposure Not suitable for direct UV exposure
The product must be fixed vertically. The product must be fixed vertically.
The product guarantees IP54 rating The product guarantees IP54 rating
if properly assembled. if properly assembled.
868.3MHz
916MHz
868.3MHz
916MHz
*
* The Blue Series receivers are bidirectional. They can receive * The Blue Series receivers are bidirectional. They can receive
and execute commands and send the status back to T-Mate and execute commands and send the status back to T-Mate
1. 1. +12 ÷ 24Vdc +12 ÷ 24Vdc
2. 2. GND (-) GND (-)
3. 3. +5Vdc +5Vdc
4. 4. COMMON COMMON
5. 5. N.O. CONTACT INPUT N.O. CONTACT INPUT
DOC.: T770.05_EN
DATE: 18/02/19