Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REPEAT PLAY OPERATION / LINE IN PLAY OPERA-
TION / CONNECT HEADPHONES / CLEANING
AND CARE / TIPS FOR HANDLING CDS
(F.17)
(F.18)
LINE IN PLAY OPERATION
1. Use an audio cable (included) to connect an
optional analog component (MP3 player,
ect.) to this jack, you can listen to the sound
from the component.
2. Use an audio cable to connect the line
socket to line out/headphone socket on your
external equipment.
3. Set the function selector to "LINE IN"
position.
Note: To avoid noise distortion, turn down the
volume on your external equipment.
Note: The backlight light but without any word.
CONNECT HEADPHONES
• Headphones can be connected using the
headphone jack located on the back of the
device.
• If headphones are connected to the
device, the loudspeakers will be turned off
automatically.
ATTENTION!
Prior to using or connecting headphones, be sure
to turn the volume down! Hearing excessively
loud music through headphones can damage
your sense of hearing.
CLEANING AND CARE
Attention:
Always disconnect the power plug from the
power outlet and allow the device to cool off
completely prior to cleaning.
• When cleaning the unit, do not submerge the
device, power cord and power plug in water
or other fluids. Clean these parts using a dry
cloth.
• In case of heavy soiling of the exterior casing,
the exterior of the unit can be carefully
wiped with a slightly damp cloth and must
then be carefully dried. Please be sure that
no moisture enters into the unit around the
function keys.
• Do not use any aggressive cleaning agents,
steel brushes, abrasive cleaners or any other
hard objects to clean this unit; they might
scratch the surface coating.
TIPS FOR HANDLING CDS
• Only use CDs bearing the following symbol:
• When handling the CD, do not touch the
reflective recording surface.
• Do not stick any labels to CDs and do not
write on the CD surfaces.
• When handling, please ensure not to bend the
CD.
20
20
GB
Werbung
Kapitel
Inhaltsverzeichnis
