Petra Manicure+Plus PC 71 Bedienungsanleitung Seite 6

Information about usage
The manicure appliance allows a perfect
manicure and pedicure in an easy way. With the 6
different accessories you can cut your finger- and
toenails in shape. Nails can be polished and horn skin
can be grinded.
Putting into operation
Take the mains cable out of the cable compartment in
the bottom of the appliance and connect it to a socket.
To switch on the motor set the switch to -1- .
The switch on the plug transformer allows the
selection of various rotary speeds. Please test the
different speeds for the various tools.
You will soon be able to choose the speed that fits you
best.
Usage
It is easier to care hands and feet after a warm bath
because nails and horn skins are more supple.
Change the tools when the appliance is switched off:
Pull out the tool which has to be changed and put the
new one right down in the appliance.
•
With the pointed abrasive head, the diamond
abrasive head and the abrasive disc your finger-
and toenails can be formed and cut.
•
The cylindrical abrasive head is suitable for
removing the horn skin on fingertips.
•
With the polishing felt head the nails are
polished before varnishing.
•
The polishing brush is suitable for cleaning
and massaging of lotion.
Cleaning
Disconnect the appliance. To take the appliance off the
cord turn the plug by 90
To insert the plug do the same the other way round.
Do not immerse the appliance into water but clean it
with a damp cloth and a small quantity of washing up
liquid. Rub dry afterwards. After using brush the tools.
For UK use only
•
This product is supplied with a 13 A plug conforming
to BS 1363 fitted to the mains lead. If the plug is
unsuitable for your socket outlets or needs to be
replaced, please note the following. If the plug is a
non-rewireable one, cut it from the mains lead and
immediately dispose of it. Never insert it into a
socket outlet as there is a very great risk of an
electric shock.
and unplug it.
o