Box Contents; General Information; Quick Release Mounting; Adjust Shifter Position - Ascher Racing B16L Produktanleitung

3. Box Contents

The box contains the following components and accessories:
- B16L | B16M button plate
- coiled USB connection cable (Binder to USB type A)
- alternative magnets to adjust paddle shifter force (please check foam insert!)
- screws and washers for wheel and Quick Release mounting
- coiled cable connector (Binder) nut removing tool
- button and encoder label sheets

4. General Information

- USB connection via coiled cable
- mass: 700 g
- standard 6 x 70mm bolt pattern (through hole) to mount quick release
- 16 inputs in total
- for compatible steering wheel rims refer to the list on the product page
- USB extension cable mounted securely to the sim rig is recommended

5. Quick Release Mounting

The B16 button plates are equipped with a standard 6 x 70mm bolt pattern with M5 through holes. Steering
wheel rim, button plate and QR need to be assembled before use. Bolts for the most common applications
are supplied.
Button plates are compatible with standard 70mm QRs (with a maximum outer diameter of 88mm) such
as:
- Simucube SC2 QR
- Asetek Invicta QR
- Buchfink Q1R
- NRG QRs

6. Adjust Shifter Position

- to achieve the most comfortable ergonomics, paddle location is adjustable
- paddle shifters can be moved inwards by 9.5 mm each:
1. open button plate by removing Binder connector nut on the rear side (required tool included)
2. remove 4 x screws (hex wrench) on the frontplate
3. unmount paddle shifters (hex wrench)
4. mount shifters to alternative mounting position
5. inward screws (now located inside the casing) must be replaced with supplied shorter ones
- paddle can be moved closer to the wheel rim:
mount paddle to the lower side of the shifter lever arm
•
for additional adjustment, 5mm paddle spacers are available separately
•
ENGLISH | GERMAN
4 | p a g e