Behringer XTM1-35 VOCAL SET Kurzanleitung Seite 17

Sync to receiver frequency channel
6. Power on the microphone, and unmute.
7. Press the microphone power button once.
8. The microphone LED will start flashing Red.
9. Point the IR LED at the bottom of the
microphone towards the IR LED of receiver.
10. Press SYNC button on receiver.
11. The IR LED of the receiver starts flashing.
12. Wait until the flashing stops.
13. The RF bar will be visible in the receiver's
display when sync has been established.
14. Talk, sing, or play into the microphone and
gradually turn up the volume in your sound
system until you hear the audio.
15. Adjust the VOLUME control as desired.
17
Quick Start Guide