Herunterladen Diese Seite drucken
Radio Frequency Energy, Certifications, Recycling Information
CE Certification
This equipment complies with the requirements relating to electromagnetic compatibility,
EN55024 and EN55022 for ITE (Information Technolology Eqipment), EN61000-3-2/-3.
It has been manufactured under the scope of RoHS compliance.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment
under FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
All EU countries
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of
all waste electrical and electronic equipment. It is no longer allowable to simply throw away
electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in
slightly different ways. Please follow your national law when you want to dispose of any
electrical or electronic products. More details can be obtained from your national WEEE
recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die
Verschrottung und das Recycling von Elektro- und Elektronikprodukten geschaffen. Diese
wurden im Elektro- und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt.
Dieses Gesetz verbietet das Entsorgen von entsprechenden, auch alten, Elektro- und
Elektronikgeräten
über
die
Hausmülltonne!
Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos
entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernimmt die Gesamtheit
der Gerätehersteller.
LINDY Herstellergarantie - Hinweis für Kunden in Deutschland
LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine
zweijährige Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie
finden Sie auf der LINDY Website aufgelistet bei den AGBs.
Tested to comply with FCC Standards.
For commercial use only!
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH – 1
Diese
Geräte
müssen
den
lokalen
LINDY No. 38401
1st Edition, October 2012
www.lindy.com
st
EDITION (OCTOBER 2012)
Fiber Optic DisplayPort Extender
User Manual
Benutzerhandbuch
CLASS 1
LASER
PRODUCT
SICHERHEITSHINWEIS
Innerhalb dieses Produktes wird unsichtbare oder sichtbare Laserstrahlung erzeugt. Unter
normalen Bedingungen kann diese Augen und Haut nicht nachhaltig schädigen. Wenn sie
jedoch fokussiert oder anderweitig gebündelt wird kann sie nachhaltige Schäden an Augen und
Haut hervorrufen. Nicht dem Strahl aussetzen oder direkt in den Strahl schauen!
Im Normalfall schalten die Laser Transmitter ab wenn kein LWL-Kabel eingesteckt ist oder dies
gebrochen ist. Bei Störungen oder Problemen setzen Sie sich bitte mit LINDY in Verbindung.
Das Gehäuse des Produktes darf unter keinen Umständen geöffnet werden.
WARNING!
This product contains invisible and/or visible laser beams.
radiation is not harmful to eyes and skin. Avoid eye and skin exposure.
Under normal operation the laser transmitters should switch of when no fibre cable is connected
or when the cable is broken. If you experience any problems with this product please contact
LINDY. Under no circumstances must the product housing be opened.
www.lindy.com
Tested to comply with FCC Standards.
For commercial use only!
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH – 1
English
Deutsch
KLASSE 1 LASERPRODUKT
MAX OUTPUT: 1mW
MULTI WAVELENGTH: 850/1310/1550nm
!!! ACHTUNG !!!
Under normal operation this
st
EDITION (OCTOBER 2012)
loading

Inhaltszusammenfassung für Lindy 38401

  • Seite 1 Im Normalfall schalten die Laser Transmitter ab wenn kein LWL-Kabel eingesteckt ist oder dies Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die gebrochen ist. Bei Störungen oder Problemen setzen Sie sich bitte mit LINDY in Verbindung. Verschrottung und das Recycling von Elektro- und Elektronikprodukten geschaffen. Diese Das Gehäuse des Produktes darf unter keinen Umständen geöffnet werden.
  • Seite 2 Receiver die beiden Stecker des Duplexkabels. Falls dieses nicht hilft prüfen Sie bitte 6. If also this does not help please contact LINDY Technical Support team under the contact ob das LWL-Kabel eine Bruch- oder Knickstelle aufweist und ersetzen Sie das Kabel.