Tesla SMART PLUG SP300 Bedienungsanleitung Seite 6

Step 2: Add Devices in Easy Mode (Recommend)
• Make sure your Tesla Smart Plug is powered on
• Make sure your mobile phone is connected to your
Wi-Fi
• Press and hold the power button for about 8 seconds
until the product turns off. After restarting, the light
will flash.
• Open your „ Tesla Sart" APP, tap „+" on the top right
of the APP.
• Select Device Type, tap „ confirm indicator rapidly
blink". It will fetch the password of the Wi-Fi network your
mobile phone is connected to.
Tap „Confirm" to connect to the device, when it appears
„ successfully add 1device", then the connection is com-
pleted and your devices is listed in your APP list.
6