Merax WF317601 Montageanleitung Seite 3

E
Maintenance Tips
Plastic wood
1.Plastic wood can withstand a temperature range from -25 °C to 65°C.
2.Avoid using sharp tools nearby, as they can scratch the furniture and cause damage.
3.No smoking nearby the furniture, as it may cause a fire.
4.Your furniture is protected with a treatment, However, it is advisable to maintain it regularly. To
clean it, use a damp sponge and soap then rinse and wipe with soft cloth. Never use abrasive
cleaners such as bleach or other harsh solvents that can damage your furniture.
5.Use protection covers when the furniture is not used.
6.Do not put glass directly on the plastic wood surface. Glass can magnify the sunlight temperature
and damage the furniture.
Iron
1.Iron rusts easily in damp conditions. Therefore, keeping iron products dry is an important factor
preventing rust. We can place desiccant around iron products or protect them with waterproof
materials. In addition, in the rainy season or humid environment, we should try to store iron
products in a dry place.
2.Regular inspection and maintenance of iron products is an important measure to prevent rus We
should regularly check the surface of the iron products, if there is damage or rust phenomenon,
should be treated in time. In addition, we should also regularly clean and maintain iron products to
maintain their finish and rust resistance. There are many ways to prevent iron from rusting. In daily
life, we can choose our own method to protect iron products according to the actual situation. For
example, in a humid environment, we can use anti-rust paint or waterproof materials to protect
iron products, in a dry environment, we can use desiccant to keep iron products dry. In addition, we
can also use anti-rust agents to enhance the anti-rust properties of iron products.
3.Avoid touching or scratching the surface protective layer, do not use acid and alkaline cleaning
agents to clean, so as not to damage the surface paint layer and make it rust.
PVC
1.Avoid exposing PVC to harmful substances for a long time, such as acids, alkalis, solvents, etc.
2.These substances may damage the surface of PVC, causing discoloration, deformation, or
corrosion.
3.If you accidentally splash harmful substances, wash immediately with water, and clean and repair
in time.
4.To prevent high temperature and direct sunlight,PVC materials are very sensitive to high
temperature, so avoid placing PVC products in a high temperature environment to avoid
deformation or melting. Especially in summer, pay attention to avoid direct sunlight.
Cushion
1.Usually in winter and special weather (natural typhoon, rainstorm warning weather), try to put
outdoor items (cushions, throw pillows, etc.) put away, slow down the rain and snow, low
temperature and wind on the loss of fabric properties.
2.Away from high temperature and open flame.
3.Don't overstretch.
4.As far as possible away from the oil, although our outdoor fabric is stain resistant and easy to
clean protective treatment, but the oil will block the breathable micropores, leading to mold,
affecting the use of performance.
5.After cleaning, it is best to air dry naturally, do not use hot air to dry.
6.Wrinkled fabric, you can use an electric iron (low temperature), a variety of hot things such as the
bottom of the heated kettle to press up, but pay attention to the temperature is not too high,
otherwise directly scrapped.