Inhaltsverzeichnis
Werbung
Safety
Instructions
Disclaimer
Before using this product, please read and fully
understand this document and all related documents of
this product. After reading this document, please keep
it well for future reference. Failure to properly operate
this product could cause serious injury to yourself or
others, or damage to this product and other property. By
using this product, you are deemed to have understood,
acknowledged and accepted all terms and contents of
this document. The user undertakes to be responsible
for his/her actions and all consequences arising
therefrom. EcoFlow is not liable for all losses caused
by the user's failure to use this product according to the
disclaimer and safety instructions.
EcoFlow reserves the right of final interpretation of this
document and all related documents of this product
where permitted by laws and regulations. These
documents are subject to update, revision or termination
from time to time without prior notice, please visit
EcoFlow website for the latest product information.
Installation
1.
The installation and operating environment must meet
relevant international, national, and local standards, and
are in accordance with the local laws and regulations.
2.
Ensure the product is protected against lightning and
heavy rain.
3.
Keep the product away from explosive or flammable
materials, chemicals, vapors and other hazardous
objects.
4.
The mounting structure where the equipment is installed
must be fire resistant. Do not install the equipment on
flammable building materials.
5.
Ensure that the installation surface is solid enough to
bear the weight of the equipment.
6.
Reserve sufficient clearance around equipment to ensure
sufficient space for installation and heat dissipation.
7.
Adaptors or conversion adapters are not allowed to be
used. Cord extension sets are not allowed to be used.
Wiring
1.
The electrical wiring steps must be performed by a
qualified electrician.
2.
Before connecting to the power source, make sure
that the main circuit is disconnected. Wear insulated
protective equipment when operating, otherwise serious
personal injury can occur.
Use and Disposal
1.
Do not touch the socket pin when the product is powered on.
2.
Do not use the EV charger if it shows any visible product
damage such as cracks, abrasions, bare leakage, and
other visible defects. Contact a qualified technician
immediately at the first sign of such damages.
3.
Do not attempt to disassemble, repair or refit the EV
charger. If necessary, please contact the qualified
technician. Improper operation will result in device
damage, electric leakage and other hazards.
4.
In case any abnormal condition happens, please turn off
incoming power supplies immediately.
5.
During charging, do not drive the EV. Charge only when
the EV is stationary. For hybrid cars, charge only when
the engine is switched off.
6.
Keep children away from the EV charger.
7.
Keep the EV charger socket clean and dry. If it gets dirty,
please wipe it with a clean, dry cloth.
8.
Our packaging materials are environmentally friendly
and can be recycled. Please put the packaging in
1 |
applicable containers to recycle it. Do not dispose of
this device with household waste. It should be taken to
a suitable facility for recycling electrical and electronic
devices. For more detailed information about recycling of
this product, please contact your local city/town council
office or your household waste disposal service.
Technical
Specifications
Model
Input & Output specifications
AC input
(three-phase)
AC output
(three-phase)
Rated frequency
Approved grid
configurations
RCD
Communication
Wi-Fi (2.4G)
Bluetooth
Environment requirement
Ambient temperature
for storage
Ambient temperature
for operation
Relative humidity
Basic information
Net weight
Dimensions
Altitude
Pollution Degree
IP rating
Compliance standard
EF-PP-H01-1
400V～16A per phase (L1/
L2/L3/N/PE)
400V～16A per phase, max.
11kW, mode 3
50 Hz
TN, TT
TypeA+6mA DC detection
Frequency range:
2400～2484.5 MHz
Maximum output power: 20
dBm
Frequency range:
2412～2480 MHz
Maximum output power: 10
dBm
－40ºC to +70ºC
－30ºC to +50ºC
5% to 95%
Approximately 3.3 kg
Charging box:
283x178x99 mm
Charging cable: 5 m
≤ 2000 m
3
IP65
EN61851-1
EN61851-21-2
Werbung
Inhaltsverzeichnis
