Screen Notifications - Smarter SMC10 Bedienungsanleitung

Screen notifications

Loading
loading
After plugging the coffee machine into
the power source, the 'loading' screen
will appear for up to 10 seconds. If the
product has been set up on the wifi
network and unplugged after use, it
may take up to 60 seconds for the wifi
network to re-connect.
No water
no water
If the water level is below 2 cups then
the machine will not allow any coffee
to be brewed and the 'no water'
screen will appear. There must be
more than 2 cups of water in the tank.
1 to 12 cups can then be selected.
Low water
low water
If you select a larger amount of cups
than is available in the water tank, the
'low water' notification will appear to
alert you that there is not enough water
for the number of cups selected.
Ready! notification
ready!
Once the cycle is complete, the
'ready!' notification will appear on the
screen. Excess coffee may pour for
a few seconds after the notification
until the pump is cleared.
Brewing
brewing
During the coffee cycle the 'brewing'
notification will appear. Settings can
then only be changed by pressing
the top left button to stop the cycle.
No Carafe
no carafe
To start a brewing cycle, the carafe
must be present and placed correctly
in the coffee machine. If the carafe
is removed the 'no carafe' screen
will appear and it will stop the cycle
automatically.
15