Operating And Display Elements - Friedhelm Loh Rittal Cmc Iii Installations- Und Kurz-Bedienungsanleitung

Assembly, Installation and operation
4 Assembly
EN
4.1 Assembly instructions
The door control module is assembled as shown in figure 2.
Note:
Please also observe the assembly instructions for all accessories used (such as magnet
door kit, door switch, door kit extension, VX IT doors with ADO (Automatic Door Open-
ing) / vent flaps, readers etc.)
5 Installation and operation
5.1

Operating and display elements

The operating and display elements are shown in fig. 3.
Key to fig. 3
1 "C" key for acknowledging messages
2 Multi-LED for status display
3 LEDs for target/limit display (30 °C, 35 °C, 40 °C)
4 Digital input (for floating contact)
5* Connection for door switch (DK 7320.793) or door comfort handle with opener function
(DK 7320.794) for door 2
6* Connection for door switch (DK 7320.793) or door comfort handle with opener function
(DK 7320.794) for door 1
7 Connection for magnet door kit (DK 7030.240, DK 7030.241 or DK 7030.250), VX IT door with
ADO / vent flaps (DK 7030.262/.263/.272/.273/.282/.283) for door 1
8 Connection for magnet door kit (DK 7030.240, DK 7030.241 or DK 7030.250), VX IT door with
ADO / vent flaps (DK 7030.262/.263/.272/.273/.282/.283) for door 2
9 External temperature sensor connection
10 CMC III reader unit connection (DK 7030.223 or DK 7030.233)
11* Door kit extension connection for climate control applications with Liquid Cooling Package
(DK 7030.261) for door 1
12* Door kit extension connection for climate control applications with Liquid Cooling Package
(DK 7030.261) for door 2
13 24 V
er packs (see section 5.2 "Installation"), supply redundancy.
14 24 V
power packs (see section 5.2 "Installation").
15 CAN bus connection, 24 V
16 CAN bus connection, 24 V
* Not to be used in conjunction with VX IT doors ADO / vent flaps
8
power supply (direct connection) for operating the motors. Note the wiring of the pow-
power supply (direct connection) for operating the magnets. Note the wiring of the
^
Rittal CMC III door control module