Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product-Notes
Surface mounted wall lamp, Saiph, Article No.: 341244
2. Proper Use
This product is only intended for lighting purposes and may only be operated on normal or non-flammable
surfaces.
Intended for installation outside the hand area when operated with incandescent bulbs.
Use the product only in protected and dry interior rooms.
Make sure that the surface is suitable for permanently and reliably taking the weight of the light.
3. Care
Repairs may only be carried out by a qualified electrician.
Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals, flammable cleaning agents or abrasives. These may cause damage to the surface
coating and/or the insulators.
4. Faulty Function
Light switched on at the switch?
Transformer mounted and connected properly?
If available; remote control intact? Check the batteries.
Check the connected lines.
Lamp defective?
5. Changing Lamps
Disconnect the product from the mains first and allow it to cool down before changing the bulb (lamp).
Only use approved lamps for the light. You will find details on the approved lamps on the type plate.
Check that the lamp is correctly inserted in the lamp holder before commissioning.
6. Storage and Disposal
Used electronic devices must be brought back to public collection points and must not be disposed of as
household waste.
Storage in a dry and clean environment. Do not strain the product mechanically during storage.
Deko-Light Elektronik-Vertriebs GmbH
02.12.2020
www.deko-light.com / deko@deko-light.com
Technische Daten können ohne Vorankündigung geändert werden. Irrtümer vorbehalten.
4 / 4
Technical Data can be changed without advance notice. Errors excepted.
Werbung
