Beemoo Supreme Bedienungsanleitung Seite 2

READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS
COT.
WARNING
• Ensure the top rails and base are fully locked.
• To prevent falls remove the bassinet must not be used once a child can sit up.
• Use only the mattress sold with this cot, do not add a second mattress on this one,
suffocation hazards.
• Never place a child in the cot when this bassinet is in place.
• This bassinet is intended for one child up to 6 months or weighing up to a maximum of
9kg.
• Never leave child unattended.
• Warning: Be aware of the risk of open fire and other sources of strong heat, such as
electric bar fires, gas fires, etc. in the near vicinity of the cot.
• Warning: Do not use the cot if any part is broken, torn or missing and use only spare
parts approved by the manufacturer.
• Warning: Do not leave anything in the cot or place the cot close to another product,
which could provide a foothold or present a danger of suffocation or strangulation, e.
g. strings, blind/curtain cords, etc.
• Warning: Do not use more than one mattress in the cot. Minimum size of mattress for
this cot: 75.5cm wide and 107.5cm long.
• Keep children away while assembling/disassembling the cot.
• Do not leave anything in the folding cot (such as toys) that provide a foothold.
• Do not place more than one child in the cot at the same time.
• Do not use this cot with a child who can climb out, weighs more than 15kg, or is taller
than 89cm.
• Keep the folding cot clear of trailing cables and hanging cords.
• Keep medication and small items that a child could choke on, away from the cot.
• Before each use, check that the assembly of the cot is correct and safe.
• Always check that all locking devices are fully engaged before placing your child in
this product.
• Folding cots with padded rims should not be used if the covering material has been
bitten through.
• There is potential for fingers or parts of the body to be injured when the product is
being folded or unfolded, and that due care should be exercised.
• Take care when unpacking and during assembly.
• Dispose of all packing materials carefully after assembly.
• Regularly check that all fittings remain tight. Retighten if required.
• Inspect the product before assembly and periodically during use. Never use this
product if there are any loose or missing fasteners, joints or broken parts.
EN