Anker PowerConf+ Bedienungsanleitung Seite 4

b) Connect to PC (USB-C cable)
C) Connect to smartphone (Bluetooth pairing)
When powered on, PowerConf+ will automatically enter the Bluetooth pairing mode.
Select "Anker PowerConf+" on your smartphone's Bluetooth list to connect.
Press Enter pairing mode
Flashes blue Bluetooth pairing
Steady blue Bluetooth connected
04 EN
Anker PowerConf+
• Each time you power on PowerConf +, it will automatically connect with
the last successfully connected device if available.
• To disconnect Bluetooth, press the Bluetoth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED
will light on clockwise and then fade out.
To power off, press and hold the power button for 2 seconds.
• PowerConf+ will automatically power on once connected to your PC by
using the USB-C cable.
• PowerConf+ will automatically power off after 30 minutes of inactivity or
no source.
2"
EN 05