CAPTELEC GH-191B Gebrauchshinweise

C 1910 / GH-191B
Solar Animal and Bird Repeller
USER INSTRUCTION
Thanks for your purchasing this item. Please read and understand these instructions and keep this manual for
future reference. This item uses solar power to recharge the batteries so it is always working after the battery
recharged. The Passive Infrared sensor(PIR) detects motion and triggers the ultrasonic speaker emitting a tone
that animals can feel and chase away these animals.
Operation
-A strong ultrasonic wave to frighten animals. The wave is activated when an animal enters the PIR Sensor
range and then the animals feel uncomfortable and will run away from the area.
-A strong flashing LED to scare animals. The strong flashing LED will be activated when an animal enters the
area, then the animal will be scared and flee away.
SET UP
- Button "Sensitivity" (Left): You can adjust the item sensitivity and distance. By turning the knob clockwise, you
increase the range of protection.
- Button "Frequency" (Right): This is to control frequency. By turning the knob clockwise, the frequency will be
increased.
Button "Frequency" position as below:
- 0: OFF
- 1: 13.5KHZ-19.5KHZ to repel animals such as mice, rats, dogs, foxes, martens etc
- 2: 19.5KHZ-24.5KHZ to repel animals such as cats, raccoons, badgers, skunks etc
- 3: 24.5KHZ-45.5KHZ to repel animals such as bats, birds, rodents etc
- 4: strong flashing lights to repel animals such as raccoon, boar, marten etc
- 5: all functions working, sweep frequency from mode 1-model 2 –model 3, and turn on strong flashing.
Figure 1 Figure 2