FOXY R-35B CAR Bedienungsanleitung

FOXY CAR 1:10 Brushless
P r o g r a m m a b l e E l e c t r o n i c C o n t r o l l e r s f o r B r u s h l e s s M o t o r s
Congratulation on your purchase of a FOXY Line electronic controller for brushles motors. The state-of-the-art FOXY CAR Line covers almost the entire range of electric powered cars -
on-road as well as off-road; tiny 1:18 size or mighty 1:8. All the ESCs can be quickly programmed using the FOXY Card supplied with the ESC. Mighty BEC of FOXY CAR controllers ensures
the best performance of your steering servo - no matter how fast and strong is, there is always a lot of energy for it!.
FEATURES
Programmable using FOXY Card CAR 1:10 (included) ● Powerfull BEC 6.0 V / 2 A
● Input: 2-3S LiPo / 5-10 NiXX ● Cooling fan ● Protection: adjustable low volt-
age cut-off, over-heat, throttle signal loss, motor blocked ● Forward/reverse,
forward/brake, forward/brake/reverse driving modes ● Throttle calibration ●
Compatible with NOVAK, LRP, Orion sensored motors (FOXY R-60B Car)
SPECIFICATION
Current (A)
Continuous/Burst
FOXY R-35B CAR
35/190
FOXY R-60B CAR
60/380
Motor Limit Input Voltage
(turns) No. of Cells
> 9 T 5-10NC\2-3Lipo
> 5.5 T 5-10NC\2-3Lipo
PROGRAMMABLE FUNCTIONS
1. PCO Cut-off Voltage
2. Running Mode
3. Motor Timing
4. Initial Acceleration
5. Throttle Percent Reverse
BEC (Voltage/ Sensorless Sensored
Current)
40x28x31 70 12
40x28x31 74 12
6. Throttle Limit
7. Percentage Braking
8. Percentage Drag Brake
9. Motor Rotation
10. Neutral Range
Dimensions Weight (g) Fan
(mm) (w. fan) (w. cables) Voltage (V)
40x28x31 70 12
40x28x31 74 12