Aurora AU-A1GSBTCXE Kurzanleitung

MODEL
‫النموذج‬
/ REFERENCE / ARTIKELNR / MODELO /
VOLTAGE (V)
/ TENSION D'ALIMENTATION / EINGANGSSPANNUNG / VOLTAJE /
SUPPLY FREQUENCY
/ FREQUENCE D'ALIMENTATION / EINGANGSFREQUENZ
/ FRECUENCIA DE SUMINISTRO / ‫تردد التيار المغذي‬
POWER CONSUMPTION
/ PUISSANCE / LEISTUNG / CONSUMO DE ENERGÍA / ‫إستهالك الطاقة‬
POWER FACTOR
/ FACTEUR DE PUISSANCE / LEISTUNGSFAKTOR / FACTOR DE POTENCIA /
LUMENS
/ FLUX LUMINEUX / LUMEN / LUMENS / )‫ليومن (كمية الضوء المنبعث‬
CCT
/ CCT / FARBTEMPERATUR / CCT / ‫درجة ح ر ارة الضوء‬
LAMP BASE
/ CULOT / SOCKEL / BASE DE LA LÁMPARA / ‫قاعدة اللمبة‬
DIMENSIONS (Ø x H)
/ DIMENSIONS / MASSE / DIMENSIONES / ‫المقاسات‬
START TIME
/ DUREE DE MISE EN FONCTIONNEMENT / STARTZEIT / HORA DE INICIO /
STAND BY POWER
/ CONSOMMATION EN VEILLE / STANDBY-POWER / ENERGÍA DE RESERVA /
MAX. OUTPUT RF POWER
/ PUISSANCE HF RAYONNEE MAX / MAX. BETRIEBS-STROMVERBRAUCH
/ MAX. POTENCIA DE RF DE SALIDA / ‫أقصى طاقة خارجة من الترددات الالسلكية‬
MAX. NUMBER OF DEVICES
/ NOMBRE MAXIMUM D'APPAREILS / MAX. ANZAHL GERÄTE
/ MAX. NÚMERO DE DISPOSITIVOS / ‫أقصى عدد من األجهزة‬
STANDARD OPERATING TEMPERATURE
/ TEMPERATURE DE FONCTIONNEMENT / STANDARD BETRIEBSZEIT
‫درجة الح ر ارة النموزجية للتشغيل‬
/ TEMPERATURA DE FUNCIONAMIENTO ESTANDAR /
IP RATING
/ CLASSIFICATION IP / IP KLASSIFIZIERUNG / CLASIFICACIÓN IP /
PROTOCOL
‫بروتو كول‬
/ PROTOCOLE / PROTOKOLL / PROTOCOLO /
FREQUENCY BAND
/ BANDE DE FREQUENCES / FREQUENZSPANNE / BANDA DE FRECUENCIA /
AU-A1GSBTCXE
AU-A1GSBTRGBWE
220-240V
‫الجهد الكه ر بي‬
50/60Hz
8W
0.7
‫معامل الطاقة‬
850lm (AU-A1GSBTCXE)
810lm @ 3000K (AU-A1GSBTRGBWE)
3000K - 6500K
E27
60mm x 117mm
0.5s
‫وقت البدأ‬
0.6W - 1W
‫الطاقة الجاهزة‬
5.5 dBm/mW (GLS)
64 Devices
/ 64 Appareils / 64 Geräte / 64 Dispositivos /
-20°C to 40°C
IP20 (Use in dry locations only)
IP20 (Utilisation uniquement en locaux non humide)
IP20 (Nur für trockene Umgebungen geeignet)
‫درجة الحماية‬
IP20 (Usar solo en lugares secos)
)‫(لإلستخدام فقط داخل األماكن الجافة‬
Bluetooth BLE 4.0 Mesh
2.402 Ghz - 2.48 Ghz
‫حزمة الترددات‬
GB
Setting up your Smart Lamp
1 Ensure you have downloaded the Aurora BLE App.
We recommend only pairing one lighting circuit at a time otherwise, there is a
2
risk other smart devices will be found on other lighting circuits.
3 Ensure the wall switch for the lighting circuit is switched off before fitting the
lamp. Your Aurora Smart lamp is fitted in the same way that traditional household
lamps are fitted. Once fitted, ensure the lamp is switched off until you are ready to
pair your devices.
4 Open your App and go to the 'add devices' icon.
Turn the lamp on, it should automatically flash twice showing it is in pairing mode.
The lamps should automatically show on the App pairing screen. Ensure all lamps
on the circuit have been discovered.
If any devices have not been found. Press 'Done' and delete all the devices and
5
reset the lamps by switching off/on six times. After the sixth time they should
flash three times. Follow Step 4 to pair your lamps again.
6 Once complete, follow advice on the App to control your lights, create spaces,
schedules and scenes.
Remember
To turn your Aurora Smart Lamp on or off remotely it must be switched on at the wall/
fixture. Your Aurora Smart Lamp should not be dimmed using a wall mounted dimmer
switch as it may cause buzzing or flickering. Keep away from liquids and humidity, Use
in dry locations only. Not suitable for emergency lighting.
For lamps with a weight significantly higher than that of the lamps for which they are a
replacement, attention should be drawn to the fact that the increased weight may reduce
the mechanical stability of certain luminaires and lampholders and may impair contact
‫األجهزة‬
making and lamp retention.
64
The lamp is based on protocol Bluetooth 4.0, to control on/off, CCT and brightness dimming
it must be controlled through the App. This product is not suitable for a dimming circuit.
Maintenance
Before replacing lamp, turn off the mains power and let lamps cool to avoid electrical
shock or burns.
Disconnect your Aurora Smart Lamp before cleaning and keep it away from water and
other liquids at all times.
The Aurora Smart Lamp does not contain any serviceable parts so do not attempt to open it.
‫درجة الحماية‬
RED Compliance
20
There are no restrictions of use.
Hereby, Aurora Limited declares that the radio equipment type
listed within this guide are in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet address:
auroralighting.com
auroralighting.com
Aurora Limited
6 Little Burrow, Burrowfields,
Welwyn Garden City,
AL7 4SW, United Kingdom
Document Version: AU-A1GSBTCXE_A1GSBTRGBWE_MULTILINGUAL_V1_19