First Start Configuration; Usernames And Passwords; Steps To Follow For Local Access - Johnson Controls Tyco Intevo Compact Lte Kurzanleitung

First start configuration

Usernames and passwords

1. To log on to the INTEVO unit, enter the following credentials:
Administrator
Username: admin
Operator
Username: operator
2. To log on to the EntraPass software, enter the following credentials:
Installer
Username: kantech
Administrator
Username: kantech1
Guard
Username: kantech2
Web Access
Username: intevo1
3. To log on to the IP Video software Exacqvision, enter the following credentials:
Administrator
Username: admin
WARNING: For your security protection, it is best practice that you change ALL
DEFAULT manufacturer passwords upon installation

Steps to follow for local access

1. To power on the INTEVO, connect the AC power cable.
2. Follow the steps in the First Boot Wizard.
Password: admin
Password: (leave blank)
Password: kantech
Password: kantech
Password: kantech
Password: intevo1
Password: admin256
© 2018 Tyco Security Products. All rights reserved.
.
13