Inhaltsverzeichnis; Wiring Instructions; Mm (7.9") Battery Positive Cable (Red); Battery Terminal Protector For Auxiliary Battery Positive Terminal - Redarc Sbi12Kit Installationsanleitung
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
EN ENGLISH
PRODUCT FUNCTION
The Smart Start Dual Battery Isolator and Wiring Kit (SBI12KIT) comes with
everything required to install your Smart Start Dual Battery Isolator, including
the Smart Start itself.
KIT CONTENTS
Part Description
1. SBI12 Battery Isolator
WIRING INSTRUCTIONS
1. REMOVE Main Battery Earth.
2. Place fuses in fuse holders and attach the red cables as
shown in diagram 1.
1
2 | EN English
2-3
4-5
6-7
8-9
Quantity
1
2
2
2
2
2
2
1
1
2
10-11
12-13
14-15
Perfectly suited to the Do-It-Yourself installer, the SBI12KIT requires no
crimping or soldering, its just plug and play.
The SBI12KIT features high quality MTA 60 Amp fuses and fuse holders with
the corresponding ring terminals already attached to the wires.
2
3
1
7
6
3. Connect a short red cable to one of the supplied battery terminals by
stripping back the wire and inserting it into the battery terminal (as shown
in diagrams 2 and 3). This terminal will attach to your auxiliary battery
positive (+) terminal.
4
5
8
9
3
Inhaltsverzeichnis
