Seite 1
INSTALLATION AND ADJUSTMENT MANUAL M000194 C1-81U003-1-A..C1-81U003-2-A Icon WL 3D DE Handbuch für Installation und Anpassung IT Manuale per l'installazione e la regolazione ES Manual de instalación y ajuste FI Asennus- ja säätöohje FR Manuel d’installation et de réglage NL Handboek voor installatie en instellingen...
Seite 2
Advertencia Avertissement El montaje del producto no es responsabilidad de SMS Smart Media Solutions AB y es muy Le montage doit impérativement être effectué de façon correcte et ne relève pas de la importante que el producto sea montado correctamente. El montaje incorrecto puede responsabilité...
Seite 3
Sulla ricevuta devono essere chiaramente leggibili nome be clearly legible on the receipt. The owner is to pay the cost of returning the product to SMS, while del fornitore e data d’acquisto. Le spese di spedizione a SMS sono a carico dell’acquirente;...
Seite 4
4 ICON WL 3D ASSEMBLY INSTRUCTIONS YOU WILL NEED NOT INCLUDED Display NUMBER OF PERSONS REQUIRED...
Seite 5
ICON WL 3D LIST OF PARTS (1x) (1x) K1 SCREW KIT (1x) (4x) (1x) (4x) (4x) (4x) (4x) (4x) K1 SCREW KIT SCREW LIST...
Seite 6
6 ICON WL 3D Use Level to mark a horizontal line Measure height for mounting Mark drilling holes Wall plate: Holes pattern...
Seite 7
ICON WL 3D Lift and support till unit is secure Min 70mm Min 70mm SELECT SCREW SUITABLE FOR DISPLAY Screw M5x20 Screw M8x16 Distance Washer 4x d5/D10x10 Optional! K1 (4x) K1 (4x) Screw M5x10 Screw M4x20 K1 (4x) K1 (4x)
Seite 8
8 ICON WL 3D Mount bracket on display Optional! K1 (4x) Loosen before mounting display Mount display on wall bracket...
Seite 9
ICON WL 3D Tighten Secure! Screen adjustments Loosen wall screws Adjust! iii. Tighten wall screws...
Seite 10
10 ICON WL 3D Tilt Adjustments Adjust tilt! Max. tilt +/- 25° Tighten Tighten Attach Covers...
Seite 11
ICON WL 3D PRODUCT DIMENSIONS Max. tilt +/- 25° SECTION A-A All dimensions in mm. SMS Smart Media Solutions AB Hästholmsvägen 32, 5th floor, SE-131 30 Nacka, Sweden www.smartmediasolutions.se...