Hayter CODE102A Bedienungsanleitung Seite 2

Introduction
These battery packs and chargers are intended to be used by residential homeowners. These battery
packs are designed to be charged only by Hayter approved 60V lithium-ion battery chargers. These
chargers are designed to charge only Hayter approved 60V lithium-ion battery packs. They are not
designed to charge any other batteries. Using these products for purposes other than their intended
use could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate and maintain your product properly and to
avoid injury and product damage. You are responsible for operating the product properly and safely.
Visit www.hayter.co.uk for more information, including safety tips, training materials, accessory
information, help finding a dealer, or to register your product.
Whenever you need service, genuine Hayter parts, or additional information, contact an Authorised
Service Dealer or Hayter Customer Service and have the model and serial numbers of your product
ready. Figure 1 identifies the location of the model and serial numbers on the product. Write the
numbers in the space provided.
Important: With your mobile device, you can scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other product information.
© 2023 - Hayter Limited
Spellbrook, Bishop's Stortford,
Herts CM23 4BU
Figure 1
Model No. __________________________________
Serial No. __________________________________
Register at
www.hayter.co.uk
Original Instructions (EN)
Printed in China
All rights reserved