Soba MC110 Gebrauchsanleitung Seite 3

UNIVERSAL CUTTER MC110 / MC310
Important:
• Never switch the appliance on when it is empty,
• Spread meat evenly in the bowl with a spatula to ensure it is chopped smoothly
and finely.
• Never run the appliance for longer than max. 2 min. at a time. Let it cool down
for 2 minutes before starting it again.
• If the supply cord is damaged, it must be replaced by the service agent.
USING YOUR UNIVERSAL CUTTER
• Place the cutter blade (D) on the blade holder (E) and add the ingredients to be
chopped.
• Place the lid (B) on the bowl (C) and turn gently until it clicks into the lock
position.
• Fit the motor unit on to the lid and bowl unit and turn gently, so the shaft of the
blade fits into the motor unit.
• Plug your appliance in to the mains.
• The Universal Cutter starts up and the cutter begins to turn as soon as you press
lightly on the motor unit (A).
• There are two speeds (I = low, II = high). The speed switch is located on the
motor unit.
• After use, unplug the appliance and wait for the blade to stop completely
• Remove the motor unit (A), lift off the lid (B) and remove the blade (D)
STORAGE
After use, wrap the cord round your Universal Cutter before putting it away.
3
INSTRUCTION MANUAL