Technical Datas
AmbienTone No.2 installation kits blend invisibly in panel materials, e.g. medium
densitiy fiber boards (MDF), wood plates or chipboards.
In this case the panel materials, e.g. parts of wall or ceiling panellings are
belaboured in a specified way, so that the AmbienTone No.2 speaker can be
assembled on the rear side of the panel materials whereas the front acts as the
membrane of the flat-panel loudspeaker.
Thus the AmbienTone No.2 Flat-panel loudspeaker is integrated invisibly and
groovelessly e.g. in wooden panellings or furniture.
Dimensions: 435 mm x 570 mm x 40 mm (H x W x D)
•
Weight: 3,5 kg
•
System: 2-way
•
Power handling: 40 Watts
•
Impedance: 4 Ohms
•
Overload protection (PTC)
•
Frequency range: 80 Hz–18 kHz
•
Sensitivity: 85 dB 1 watt / 1 metre
•
Dispersion angel: Horizontal x Vertical: 180° x 180°
•
Design:
•
Connection: 10 m speaker cable, colour coded
•
12
Front adhesive