Yealink RoomPanel Schnellstartanleitung Seite 9

Option 3: Mount on the Glass
Step 1: Glue the Mounting Bracket to the Glass
Choose A 3M tape if you route the cable in the wall, otherwise choose B.
Note:
1. Clean the surface of the glass before gluing the 3M tape.
2. Press the 3M tape hard to help improve bond strength between the
glass and the mounting bracket.
3. Wait 1 hour after gluing the mounting bracket and install the RoomPanel
next.
This guide mainly takes A 3M tape as an example for reference.
3M tape
Keep the
Step 2: Route the Ethernet Cable
A
facing up.
Option 1
6
B
Option 2
Glass